Which of the following enables the validation of both user and device credentials in a single EAP transaction? (Select the best answer.)

Last Updated on August 2, 2021 by Admin 3

Which of the following enables the validation of both user and device credentials in a single EAP transaction? (Select the best answer.)

  • PEAP
  • EAP-FAST
  • EAP-FAST with EAP chaining
  • EAP-MD5
Explanation:
Extensible Authentication Protocol (EAP)Flexible Authentication via Secure Tunneling (FAST) with EAP chaining, which is also sometimes called EAPFAST version 2 (EAPFASTv2), enables the validation of both user and device credentials in a single EAP transaction. EAP chaining enables a Cisco security device to validate authentication credentials for both a user and the user’s device. In order to enable EAP chaining, both the Cisco security device and the supplicant device must support EAP chaining. The Cisco security device will assign a different level of authorization access depending on one of four success and failure possibilities, as shown in the following table:

300-735 Part 01 Q07 015
300-735 Part 01 Q07 015

EAPFAST is an authentication protocol that can be used for point-to-point connections and for both wired and wireless links. The EAPFAST authentication process consists of three phases. The first phase, which is optional and is considered phase 0, consists of provisioning a client with a PAC, which is a digital credential that is used for authentication. A PAC can be manually configured on a client, in which case phase 0 is not required. The second phase, which is referred to as phase 1, involves creating a secure tunnel between the client and the server. The final phase, which is referred to as phase 2, involves authenticating the client. If the client is authenticated, the client will be able to access the network.
EAPTransport Layer Security (TLS) is an Internet Engineering Task Force (IETF) standard that is defined in Request for Comments (RFC) 5216. It does not support EAP chaining. Protected EAP (PEAP) is an open standard developed by Cisco, Microsoft, and RSA? it does not support EAP chaining.
EAPMessage Digest 5 (MD5) uses an MD5 hash function to provide security and is therefore considered weak when compared to later methods. EAP is an IETF standard that was originally defined in RFC 2284? it does not support EAP chaining.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments