Last Updated on October 27, 2021 by Admin 2

MS-203 : Microsoft 365 Messaging : Part 05

  1. HOTSPOT

    You have a Microsoft Exchange Online subscription that uses a namespace of litwareinc.com.

    You create a connector in Exchange Online that is configured as shown in the following exhibit.

    MS-203 Microsoft 365 Messaging Part 05 Q01 067
    MS-203 Microsoft 365 Messaging Part 05 Q01 067

    Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

    NOTE: Each correct selection is worth one point.

    MS-203 Microsoft 365 Messaging Part 05 Q01 068 Question
    MS-203 Microsoft 365 Messaging Part 05 Q01 068 Question
    MS-203 Microsoft 365 Messaging Part 05 Q01 068 Answer
    MS-203 Microsoft 365 Messaging Part 05 Q01 068 Answer
  2. You have a hybrid deployment that contains a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 server named Server1. All users use an email address suffix of @contoso.com.

    On Server1, you create a new mailbox that uses an email address of user1@contoso.com.

    Users hosted in Exchange Online report that they receive a non-delivery report (NDR) when they attempt to send email messages to user1@contoso.com. The NDR contains the following text: “User1 wasn’t found at contoso.com.”

    You verify that the Exchange Online users can send email successfully to the other mailboxes hosted on Server1. Users hosted on Server1 can send email to user1@contoso.com successfully.

    You need to identify what causes the email delivery to fail.

    What should you use?

    • the Exchange admin center
    • the on-premises Exchange admin center
    • Azure AD Connect Health
    • the Azure Active Directory admin center
    Explanation:
    It’s likely that the new user account hasn’t replicated to Azure Active Directory. Azure AD Connect is responsible for account replication between on-prem AD and Azure AD.
  3. You have a Microsoft Exchange Online tenant named contoso.com.

    Several users report that email messages sent to the users at another company named fabrikam.com contain a Winmail.dat attachment.

    You need to prevent the fabrikam.com users from receiving Winmail.dat attachments.

    What should you do?

    • Create an Outbound connector that has the ValidationRecipients parameter set to fabrikam.com.
    • Create an Outbound connector that has the ValidationRecipients parameter set to contoso.com.
    • Configure a remote domain that has the TrustedMailOutboundEnabled parameter set to $False.
    • Configure a remote domain that has the TNEFEnabled parameter set to $False.
  4. You have a Microsoft Exchange Online subscription.

    You need to generate a CSV file containing all the email messages that failed to send from the user1@contoso.com email address during the last 30 days.

    What are two possible ways to achieve the goal? Each correct answer presents part of the solution.

    NOTE: Each correct selection is worth one point.

    • From the Security & Compliance center, run a message trace.
    • From the Exchange admin center, run a message trace.
    • From Exchange Online PowerShell, run the Get-MessageTrace cmdlet.
    • From the Security & Compliance center, export the mailbox audit logs.
    • From Exchange Online PowerShell, run the Get-MessagetraceDetail cmdlet.
  5. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com.

    You need to prevent all users from performing the following tasks:

    – Sending out-of-office replies to an email domain named fabrikam.com.
    – Sending automatic replies to an email domain named adatum.com.

    The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet.

    Solution: You create one mail flow rule.

    Does this meet the goal?

    • Yes
    • No
  6. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com.

    You need to prevent all users from performing the following tasks:

    – Sending out-of-office replies to an email domain named fabrikam.com.
    – Sending automatic replies to an email domain named adatum.com.

    The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet.

    Solution: You create two new remote domains.

    Does this meet the goal?

    • Yes
    • No
  7. You have a Microsoft Exchange Online tenant that uses a third-party email gateway device.

    You discover that inbound email messages are delayed.

    The gateway device receives the following error message when sending email to the tenant.

    4.7.500 Server busy, please try again later.

    You need to prevent inbound email delays.

    What should you configure?

    • Organization Sharing
    • an MX record for the domain
    • a transport rule
    • a connector
  8. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com.

    You need to prevent all users from performing the following tasks:

    – Sending out-of-office replies to an email domain named fabrikam.com.
    – Sending automatic replies to an email domain named adatum.com.

    The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet.

    Solution: You modify the default remote domain.

    Does this meet the goal?

    • Yes
    • No
  9. HOTSPOT

    You have a Microsoft Exchange Online tenant named contoso.com.

    Email messages from a remote domain named fabrikam.com are received from a server that uses a wildcard certificate for fabrikam.com and are encrypted by using TLS.

    Fabrikam.com is switching to a third-party cloud filtering service for inbound and outbound email. The IP address used by the third-party service is 131.107.200.10.

    You need to reconfigure the connector to only accept messages from fabrikam.com that are encrypted and received from the third-party service.

    Which two settings should you modify for the connector? To answer, select the appropriate settings in the answer area.

    NOTE: Each correct selection is worth one point.

    MS-203 Microsoft 365 Messaging Part 05 Q09 069 Question
    MS-203 Microsoft 365 Messaging Part 05 Q09 069 Question
    MS-203 Microsoft 365 Messaging Part 05 Q09 069 Answer
    MS-203 Microsoft 365 Messaging Part 05 Q09 069 Answer
  10. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Microsoft Exchange Online tenant that contains the following email domains:

    – Adatum.com
    – Contoso.com
    – Fabrikam.com

    When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.

    You need to ensure that the users send email by using the @fabrikam.com email domain.

    Solution: You modify the properties of the fabrikam.com accepted domain.

    Does this meet the goal?

    • No
    • Yes
  11. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Microsoft Exchange Online tenant that contains the following email domains:

    – Adatum.com
    – Contoso.com
    – Fabrikam.com

    When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.

    You need to ensure that the users send email by using the @fabrikam.com email domain.

    Solution: From the Microsoft 365 portal, you set fabrikam.com as the default domain.

    Does this meet the goal?

    • No
    • Yes
  12. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Microsoft Exchange Online tenant that contains the following email domains:

    – Adatum.com
    – Contoso.com
    – Fabrikam.com

    When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.

    You need to ensure that the users send email by using the @fabrikam.com email domain.

    Solution: You create an email address policy.

    Does this meet the goal?

    • No
    • Yes
  13. HOTSPOT

    You have a Microsoft Exchange Online tenant.

    You have an on-premises scanner that emails scanned documents by using SMTP.

    You need to create a Microsoft Office 365 SMTP relay to route email from the scanner to the internet. The solution must ensure that the connector accepts only email sent by the scanner.

    How should you configure the connector? To answer, select the appropriate options in the answer area.

    NOTE: Each correct selection is worth one point.

    MS-203 Microsoft 365 Messaging Part 05 Q13 070 Question
    MS-203 Microsoft 365 Messaging Part 05 Q13 070 Question
    MS-203 Microsoft 365 Messaging Part 05 Q13 070 Answer
    MS-203 Microsoft 365 Messaging Part 05 Q13 070 Answer
  14. HOTSPOT

    You have a Microsoft Exchange Online tenant.

    You need to create a report to display messages that have a delivery status of Quarantined.

    From the modern Exchange admin center, you create a new message trace.

    How should you configure the message trace? To answer, select the appropriate options in the answer area.

    NOTE: Each correct selection is worth one point.

    MS-203 Microsoft 365 Messaging Part 05 Q14 071 Question
    MS-203 Microsoft 365 Messaging Part 05 Q14 071 Question
    MS-203 Microsoft 365 Messaging Part 05 Q14 071 Answer
    MS-203 Microsoft 365 Messaging Part 05 Q14 071 Answer
  15. DRAG DROP

    You have a Microsoft Exchange Online tenant.

    You need to import PST files from a legacy archiving solution to Exchange Online. You will import the PST files over the internet.

    Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

    MS-203 Microsoft 365 Messaging Part 05 Q15 072 Question
    MS-203 Microsoft 365 Messaging Part 05 Q15 072 Question
    MS-203 Microsoft 365 Messaging Part 05 Q15 072 Answer
    MS-203 Microsoft 365 Messaging Part 05 Q15 072 Answer
  16. You manage a Microsoft Exchange Server 2019 hybrid deployment. All user mailboxes are located both on-premises and in the cloud. All public folders reside in Exchange Online.

    You need to configure the deployment so that the on-premises mailboxes can access the public folders.

    Which three commands should you run? Each correct answer presents part of the solution.

    NOTE: Each correct selection is worth one point.

    • Sync-MailPublicFolders.ps1
    • Set-OrganizationConfig –PublicFoldersEnabled Remote
    • Import-PublicFolderMailboxes.ps1
    • Sync-MailPublicFoldersCloudToOnprem.ps1
    • Set-OrganizationConfig –PublicFoldersEnabled Local
      
      -RemotePublicFolderMailboxes PfMailbox1
  17. HOTSPOT

    You have a Microsoft Exchange Server 2019 hybrid deployment.

    You run the Get-HybridConfiguration cmdlet and receive the output shown in the following exhibit.

    MS-203 Microsoft 365 Messaging Part 05 Q17 073
    MS-203 Microsoft 365 Messaging Part 05 Q17 073

    Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

    NOTE: Each correct selection is worth one point.

    MS-203 Microsoft 365 Messaging Part 05 Q17 074 Question
    MS-203 Microsoft 365 Messaging Part 05 Q17 074 Question
    MS-203 Microsoft 365 Messaging Part 05 Q17 074 Answer
    MS-203 Microsoft 365 Messaging Part 05 Q17 074 Answer
  18. Your company has a Microsoft Exchange Server 2019 hybrid deployment.

    You are migrating mailboxes to Exchange Online by using remote mailbox move requests.

    A recent security breach at the company required that the passwords of all privileged accounts be changed.

    Since the password change, mailbox move requests are failing.

    You need to ensure that the mailbox migration can resume.

    What should you do first?

    • From Exchange Online, run Set-MigrationConfig.
    • From Exchange Online, run Set-MigrationEndpoint.
    • Run iisreset /noforce on all the Exchange servers that have MRSProxy enabled.
    • From Exchange on-premises, run Set-MigrationConfig.
    • From Exchange on-premises, run Set-MigrationEndpoint.
  19. You manage an Exchange Online tenant.

    You plan to migrate on-premises Microsoft Exchange Server mailboxes by using a cutover migration.

    You need to grant the required permissions to the migration administrator account to complete the migration. The solution must use the principle of least privilege.

    Which three permissions should you grant? Each correct answer presents a complete solution.

    NOTE: Each correct selection is worth one point.

    • the FullAccess permission on each on-premises mailbox and the WriteProperty permission to modify the TargetAddress property of the on-premises user account
    • the Receive As permission on the on-premises mailbox database that stores the user mailboxes and the WriteProperty permission to modify the TargetAddress property of the on-premises user account
    • Domain Admins group member in Active Directory Domain Services (AD DS) of the on-premises Exchange organization
    • the FullAccess permission on each on-premises mailbox
    • the Receive As permission on the on-premises mailbox database that stores the user mailboxes
  20. You have a Microsoft Exchange Server 2019 hybrid deployment.

    You plan to implement Hybrid Modern Authentication (HMA).

    You retrieve the Exchange virtual directory settings, and you discover the following output.

    MS-203 Microsoft 365 Messaging Part 05 Q20 075
    MS-203 Microsoft 365 Messaging Part 05 Q20 075

    You need to prepare the virtual directories for the planned implementation of HMA.

    What should you do?

    • Add OAuth as an authentication method.
    • Remove NTLM as an authentication method.
    • Delete https://mail.contoso.com from the ExternalUrl value.
    • Modify the InternalUrl value to http://mail.contoso.com.